STUMPJUMPER COMP ALLOY(SPECIALIZED)

Información

Cuadro: Alloy chassis and rear-end, asymmetrical design, 29 Trail Geometry, horst pivot BB adjustment, threaded BB, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel Seat Binder Alloy, 38.6mm
Amortiguador: FOX FLOAT DPS Performance, Rx Trail Tune, rebound and 3-position compression adjust, S1:190x42.5mm, S2-S6: 190x45mm
Horquilla: FOX FLOAT 34 Rhythm, GRIP damper, two position Sweep adjustment, 15x110mm axle, 44mm offset, 140mm of travel
Potencia: Alloy Trail Stem, 35mm bar bore
Manillar: Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm width
Puños: Specialized Trail Grips
Sillín: Bridge Comp, Hollow Cr-mo rails, 155/143mm
Tija: X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 175mm, S6: 190mm
Freno delantero: SRAM G2 R, 4-piston caliper, hydraulic disc, 200mm
Freno trasero: SRAM G2 R, 4-piston caliper, hydraulic disc, 180mm
Plato: Steel, 30T
Pulsador: SRAM NX Eagle, trigger, 12-speed
Biela: SRAM NX Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
Cassette SRAM NX Eagle, 12-speed, 11-50t
Cadena: SRAM NX Eagle, 12-speed
Cambio: SRAM NX Eagle, 12-speed
Pedalier: SRAM DUB, BSA 73mm, Threaded
Llantas: Specialized 29, hookless alloy, 30mm inner width, tubeless ready
Cubierta trasera: Purgatory, GRID casing, GRIPTON® T7 compound, 29x2.3"
Radios: DT Swiss Industry
Cubierta delantera: Butcher, GRID casing, GRIPTON® T7 compound, 29x2.3"
Buje delantero: Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h
Buje trasero: Alloy, sealed cartridge bearings, 12x148mm thru-axle, 32h